Vibro separators are circular unitary gyratory screens used to separate mass composition of solids from solids, liquid from solid and for gradation of materials as per particle size, having a very wide range applications.
This is accomplished by vibrating the screens in three different planes along the vertical axis by means of a specially designed vibratory motor having off centered weights at the top and bottom end of the motor shaft.
The top weight causes vibration in the horizontal plane which causes the material to move across the screen towards the periphery. The lower weight acts to tilt the machine which causes vibration in the vertical tangential axis.
The angle of lead of the lower weight with relation to the upper weight provides variable control of the screening pattern. Thus the material moves across the screens and also in the vertical and tangential planes enabling maximum screening. “SHREE BHAGWATI” Vibro sifter are available with a wide range of possible screen sizes (mesh) Option for multiple deck separation is also possible.
The sifter unit consist of Specially designed vibratory motor to run on 400/440V, suitable HP, 3 phase, 50 cycles electric supply ,with adjustable eccentric weights at the top and bottom of the motor shafts mounted vertically at the center of the base plate of screening unit. Screening unit consists of SS 304 screen sandwiched between SS 304 hopper and bowl with the help of special clamp with gasket. This in turn is clamped to the base plate. Rugged Springs placed over the circular motor base amplify the vibration and at the same time restrict the vibration from being transferred to the floor.
|A||SERVICE||Sieving / Grading of dry powder / granules|
|C||MOUNTING||Vertical on Wheel|
|D||LOCATION||Inside the room|
|E||MODEL||cGMP, Triple Deck|
|F||CAPACITY||Up to 200 Kgs/Hr|
|G||APPLICATION||Pharmaceuticals, API, Bulk Drugs and all powder processing industries|
|02||OPERATING & DESIGN CONDITIONS|
|A||FEED MATERIALS||Dry / Wet granules|
|B||BULK DENSITY||0.6 gms /cc||To be confirm by client|
|E||CHARGING DECK TYPE||Cylindrical with LIP face at both ends.||16 SWG|
|F||DISCHARGING DECK TYPE||Cylindrical with LIP face at both ends with cone welded inside to channelize the flow||16 SWG|
|G||INTERMEDIATE DECK TYPE||Cylindrical with LIP face at both ends.||16 SWG|
|H||CLAMPS||Quick openable type in two halves with locking arrangement and tension adjustment screw.|
|i||SIEVE||Lead free type with silicon rubber molding.||03 Nos. sieves|
|I||SIEVE MOUNTING||Sandwiched between upper & lower deck|
|J||WHEELS||03 NOS. of size dia. 4” x 1 ¼” thick with locking arrangement|
|K||CHARGING NOZZLE SIZE||200 DIA. With TC end connection||Without TC clamp|
|L||DISCHARGING NOZZLE||120 DIA. With TC end connection||Without TC clamp|
|M||OVERSIZE REJECTED MATERIAL PORT SIZE||120 DIA. With TC end connection||Without TC clamp|
|N||AIR VENT||25 MM TC with 0.3 micron air vent fiter|
|B||CHARGING HT.||1650 mm|
|C||DISCHARGING HT.||700 mm||Approx.|
|05||MATERIAL OF CONSTRUCTIONS|
|A||CONTACT PARTS||SS 316,|
|B||SIEVE||SS 316, LEAD FREE|
|C||SUPPORT STRUCTURE||SS 304|
|E||GASKETS||FOOD GRADE SILICON|
|F||MOTOR BASE PLATE||MILD STEEL|
|A||POWER REQUIREMENT||3Ph/415VAC/50 Hz/AC|
|B||DRIVE MOTOR HP||1.0 HP / 1440 RPM /Non FLP|
|E||MOTOR||Good Earth make|
|F||MOUNTING||DIRECT MOUNTING ON MOTOR BASE PLATE|
|G||INSPECTION WINDOW||WILL BE PROVIDED|