ALSO AVAILABLE IN COMBINATION OF D & B TOOLING IN ONE MACHINE.
Many different model we manufacturing as per customer requirement including R&D Mini Tablet Press such as Mini Tablet Press, Mini Lab Model Tablet Press Machine, Rotary Tablet Press, Small Scale Tablet Press Machine and Mini Tableting Machine , MINI PRESS 11 station- B tooling , MINI PRESS 9 station- D tooling , MINI PRESS 7 D + 7 B tooling special, 11 Station and 9 Station 7 + 7 (COMBO) with B ,D" D+ B" tooling tablet punching Double Layer, Square cGMP, With Pre Compression)11 Stn. "B'', 9 Stn. "D" & 7 Stn. "D" + 7 Stn. "B" (Max. Output 19,800 Tablet / Hour)
Salient Features :
- This machine is built on GMP directives & robust construction.
- All Contact parts of the machine is made from SS 316 Material.
- Main Motor is fitted with center gear box system which minimizes wear & tears and noise level of the machine.
- Main Motor is provided of standard make Bharat Bijalee / Crompton Greaves.
- Main motor drive/ turret speed is controlled by AC variable frequency drive.
- Special Grade Cast Iron is used for Turret.
- Electro Less Nickel Plating is provided on Turret to improve life & prevent rusting of turret.
- All upper guard is manufactured from Acrylic Sheet and self locking arrangement for fitting of Upper Guard.
- Needle Roller bearing is provided on bottom side of turret which helps free running of the turret.
- Single Phase Preventer is provided to prevent reverse direction running of the machine.
- Pre-compression Arrangement: The machine is provided with pre-compression arrangement as a standard features. Which enhance the compression capability of the machine in case of low density powder & reduce the capping problem in the tablets.
- Upper Punch Penetration : The machine is provided with upper punch penetration as a standard features. Which allows tablet compression in the entire length of die. It also facilitates easy ejection of tablets in case of difficult granules.
- Outside Controls: The machine is having all the controls outside of the machine.
1) Tablet weight control
2) Tablet Thickness control
3) Tablet lower pre compression control
4) Upper punch penetration
- Lubrication System: Main Gear Box is enclosed type and duly emerged in lubrication oil. For lubrication of upper & lower pressure roll pin, pre compression pressure roller, fork & other moving parts grease nipples are provided. For upper punch lubrication oil cup is provided.
- Electronic digital tablet counter cum rpm meter and cumulative output indicator is provided on the control panel.
- All upper guard interlocks is provided as a safety function.
- Force Feeder Assembly is provided optionally.
- Lubrication System: Main Gear Box is enclosed type and duly emerged in lubrication oil. For lubrication of upper & lower pressure roll pin, pre compression pressure roller, fork & other moving parts grease nipples are provided. For upper punch lubrication oil cup is provided.
- Electronic digital tablet counter cum rpm meter and cumulative output indicator is provided on the control panel.
- All upper guard interlocks is provided as a safety function.
- Force Feeder Assembly is provided optionally.
Technical Specification
| Machine Type |
Tablet press machine-Mini- 8 D |
Tablet press machine-Mini- 10 D |
Tablet press machine-Mini- 10 B |
| Model |
Mini Press |
Mini Press |
Mini Press |
| Number of Stations |
8 |
10 |
10 |
| Type of Tooling |
D |
D |
B |
| Output- Tablets/Hr |
4800 / 14000 |
6000 / 18000 |
6000 / 18000 |
| Turret RPM (Min-Max) |
10-30 |
10-30 |
10-30 |
| Max. Operating Pressure |
60 KN |
60 KN |
60 KN |
| Max. Tablet Diameter |
22 mm. |
22 mm. |
16 mm. |
| Max. Depth of Fill |
20.5 mm. |
20.5 mm. |
17.5 mm. |
| Upper Punch Penetration |
2 to 6 mm. |
2 to 6 mm. |
2 to 6 mm. |
| Diameter of Die(mm.) |
38.10 |
38.10 |
30.15 |
| Diameter of Punch(mm.) |
25.34 |
25.34 |
18.99 |
| Length of Punch(mm.) |
133.6 |
133.6 |
133.6 |
| Power |
2.0 H.P. x 1440 RPM x 3 Phase x 415 Volts |
| Overall Dimensions(mm.) |
480 x 670 x 1050 mm |
